Ra'alloy Ramps are the only manufacturers of  combined aluminium walk up and car ramps and take loading of Removal trucks  into another dimension.

Lightweight and multi section the aluminium ramps are easily handled by one person and assembled in minutes.

When used for car loading the ramps are simply set apart at the correct width for the car wheels. Simply close the ramps together when using as walk up ramps.

The ramps are designed so that there is a minimum lip on the inner edges and this mimises any tripping hazard, while both outer edges have a small anti drive off lip. Where a deeper anti walk off side is required we can supply our anti walk boards shown in the picture left running up the outer edge.

Our combined car loading and walk up ramps can be manufactured in single spans (above right) or multi section (above left) where a long ramp is required for loading low wheelbase cars. Multi section spans usually have fold down support legs and offer a Safe Working Load of 2500 kgs

The floor is our usual branded anti slip floor which offers full traction to cars or user in most weather conditions.

The connection to the truck is usualy a hook type which can also be used to connect directly to a Pallet loading table and used along side of the truck where space is a problem.

Specially fabricated ramps are available.

---

Add this page to your favorite Social Bookmarking websites