Our aluminum Removal Ramps and Walkboards are designed to offer a lifetime of service. In fact we offer a full ramp replacement service, if your ramp loses the traction that Ra'alloy Ramps are renowned for within 10 Years.

Here are just a few of the technical issues that surround Ra'alloy Multi Section Truck Ramps

Assembley

 

 

 

 

Assembly of Ra'alloy Multi Section Removal Ramps is easy and quick.

• In the case of a hook on version detailed above simply open the fold down leg and lock back into position
• Slot the ramp pegs into the holes in the edge of the truck which are 13mm drilled holes (in the case of rest on and continuous hook detailed below they are connected to the truck as detailed below )
• Slot the bottom section in place and use

Our ramps are built on strength, simplicity and speed for the user 

Fixing

Rest on is a ramp that simply Rests onto the location and is locked into place by a buffer bar below, which stops the ramp moving forward and tie strap on the underside of the ramp to pull the ramp against the buffer bar therefore holding the ramp secure.

This system is beneficial when used on other vehicles or or for unloading containers when the container is raised on legs

Hook On the ramp is secured to the truck by drilling two 13 mm (1/2”) holes in the truck and locating the pegs on the ramp into the holes.

This type of ramp connection is used when the ramps stays with the truck and is faster to connect.

Another hook on method is used when the vehicle has a full length channel running along the connection area and we fit a full length hook section - this again depends on preference.

This type of fixing is great for new builds or where there is an existing side channel as it can be slotted at any position to line up with a gate or door.

Load Testing
The whole of Ra'alloy Ramps Removal Truck ramps range are manufactured within the tolerances set by load tested ramps.

The ramps were tested by an independant body 'Lloyds British Load Testing Ltd' who overloaded the ramps until they failed and then the ramps were certified to have a safe working load. 

The detail left shows a Two Stage ramp under test with solid blocks of steel . By a divisible factor Lloyds determined the ramps to have a 750 kg safe working load

Please see our Accessories for more informationon Pallet Loading Tables etc

Click here to see why choose Ra'alloy Aluminium Truck Ramps