Ra'alloy single span portable aluminium truck ramps offer the ultimate in strength and versatility. Since 1994 these loading ramps have been sold worldwide and have proved their rugged, yet versatile worth with many of the worlds leading trucking and touring companies.

Available in various stock sizes and in lengths of up to 500 cm, however we can manufacture any length or width truck ramp.

Our standard single span aluminum touring ramps are hand made and where the end of the ramp meets the ground it is always a full tapered  so that the flight cases just rolls on and off the ramp.

Ra'alloy truck ramps and touring ramps have become the No1 in the Entertainment Trucking industry where they have proved there strength and where we have perfected the correct weight ramp to prevent bouncing and falling off the truck when in use.

Take a look at just a few of clients who trust Ra'alloy Truck Ramps - thats why we are No 1

When touring these ramps store flat and are great for unloading the truck, re-locating the ramp away from the trailer and then used as a bridging ramp for steps, stages. They can even be used as a walkway across uneven ground.

Single span ramps have a recommended ceiling height to work at, although they can be used successfully at any height up to that ceiling.

Quality Counts - Quality Lasts - Quality Is Safe

Together with our super strong knurled anti slip floor all of our truck ramps come with our unique, hand made rest on end . This ensures that the ramp has the same strength from end to end.

The load bearing part of any ramp is where the ramp meets the truck. We do not rely on a aluminium section welded onto the end of the ramp to support the ramp and load, as eventually this section will probably break off. (see technical page here )

Our system ensures that the ramp is supported onto the truck as it is the whole length of the ramp - by the full thickness of the sides. 

Other Features 

• Lifetime guarantee on our unique, all weather anti slip flooring which is ribbed and machine serrated for full 360 degree traction
• Super strong floor will not bend to the shape of the flight case wheels after use
• Simple, strong, long reach rest on top will reach over most Crash Bars
  
• Manufactured from lightweight construction grade aluminium - but just heavy enough so that it wont bounce and move when in use
• Top leading edge and bottom trailing edge taper, leaving a smooth walkway without any potential tripping edges
• Solid welded construction
• Standard products manufactured to withstand loads of 750 kgs, tested by Lloyds British Load testing to 3 times that amount
• Health & Safety approved rest on top leading edge guides, ensures you do not miss the ramp when unloading in poor visability or when sight is obscured.
• Full length raised walkway edges prevents accidently wheeling off the ramp , while not obstructing Flight Cases or Meat Racks etc.
• Standard ramps manufactured up to 500 cm long in one span.
• Use as a bridging ramp away from the vehicle
• Safety accessories available
• Many other components available to convert your ramp for other uses, such as public access ramps, which can be purchased seperately from the ramp.
• Manufactured in accordance with BS 6109-2:1989 and BS EN 1756-2:2004 (click to view)
• Very economical cost

Click here to see tuck ramp technical information and standard stock sizes

or click here to see Safety accessories such as Handrails and Anti Walk Off Boards

For more information please contact us here

Ra'alloy Aluminium Truck Ramps - Manufactured in the UK thats a guarantee in itself

---

Add this page to your favorite Social Bookmarking websites