Multi Section Van Ramps

Ra`alloy multi section van ramps are manufactured from lightweight aluminium together with our unique, all weather anti slip floor

The ramps are simple and quick to assemble as the top ramp section has a fold down support leg when the ramp is in use. the lower section simply slots into place and is also supported by the leg .

They are ideal to use when an extra long ramp is required for low ground clearance machines, such as Industrial Cleaning Machines or Extra Long Flight Cases are to be loaded.

Our everlasting anti slip floor offers full traction footing, whatever the weather and is guaranteed to remain that way for life.

Where the ramp meets the ground the ramp tapers, therefore not leaving a step at the bottom and leaves smooth run without tripping or wheel locking hazards.

The multi stage van ramps are manufactured with two standard, ramp to van connection methods, either hook on or rest on. However should you have a preferred connection method, we can include this at manufacture stage.

These multi stage van ramps offer a standard 750 kgs safe working load although heavier specifications are available. Ramps are tested by Lloyds British load testing to 3 times the safe working load that we assign.

Our multi stage van ramps are simple to use..Connect the top section to the van and unfold the leg, which is held in place by a spring lock. Once in place connect the bottom section of the ramp into the support ramp.

 

 

 

 

Multi Section Van Ramp Features

• Everlasting anti - slip surface which remains that way in most weather conditions
• Virtually maintenance free
• Top leading edge and bottom trailing edge tapers to nothing for smooth clean run
  
• Lightweight aluminium construction with strong foldaway steel leg
• Standard products manufactured to withstand loads of 750 kgs (tested by Lloyds British Load testing to 3 times that amount)
• Rest on` or `hook on` attachment.
• Standard multi section van ramps up to 3 metres (10`)long from stock - bespoke products guaranteed despatch time 14 days from order depending on the complexity
• Stores flat

Click here to see more reasons to buy only Ra'alloy Aluminium Van Ramps

 

For more information and standard stock sizes please click the technical tab above

Technical Info

Fixing
Rest on is a ramp that rests onto the location prevented moving forward by a buffer bar which pushes against the bumper. A strap can then be secured on the underside of the ramp to pull the ramp against the van and holds the ramp secure.

Hook On the ramp is secured to the truck by drilling two 13 mm (1/2”) holes in the truck and locating the pegs on the ramp into the holes.

Standard stock size, Ideal working heights and Approximate handling weights.
Product Code	Approx Weight (KG)	Max Recommended Working Height (CM)	Length (M)	Width (M)
TSV 8	40	56	235	80
TSV 9	43	61	250	80
TSV 10	47	66	280	80
TSV 11	51	71	300	80
The recommended working height allows safe use of the ramp 10 cm  above and below the height

OUR PRIORITY IS THE USERS HEALTH AND SAFETY WHEN LOADING AND UNLOADING USING RAMPS. - OUR RAMPS ARE MANUFACTURED WITH EXTENSIVE QUALITY AND SAFETY CHECKS PLEASE ALWAYS READ OUR USER GUIDE

  All products are shipped worldwide

Whatever your ramp requirement please contact us , email us or call our team on +44 (0) 1952 677877 to discuss your requirement and let us take the headache of your ramp design.