Hello Ra'alloy,

I'm very interested in your truck and van ramps. Can you tell me what the difference is between the design of your "single-span" truck and van ramps. I'm really looking for something that I can use on a number of different vehicles, as I can't afford to deck out all of my vehicles with brand-spanking new ramps! I've seen your ramps out and about and need your advice. I run both 7 1/2 tonne vehicles, and I have three low-wheel base sprinters. What do you recommend?

Mike

Mike,

Thanks for your mesaage. The advantage of all of our standard single-span ramps is that they are designed in the same way which means that they are advised up to a maximum recommended height use but they can be used on vehicles with a lower floor-height.

If I can draw your attention to the following page on our website, this should show you exactly how easy the ramps are to deploy.

http://www.raalloy.co.uk/ramps/truck_ramps/single_span_truck_ramps.html

For your low-wheel base sprinters, we would recommend our product code RR08 and for a maximum height of 1000mm, we would recommend the standard RR13.

If you need any further information, could you please contact me or my colleague Stuart Reynolds on 01952 677877 or via e-mail; luke@raalloy.co.uk

Please note, that we can also manufacture bespoke sizes of ramps.

Kind Regards

Luke Smith
Ra'alloy Moderator